User's Manual

2). Delete a scan group
1. Right click a specific scan group in the tree view.
2. Select “Delete (D)”.
3). Add a scan group member
Select a channel to be added from available channels.
Click “Add (A)” key.
4）Delete a scanning member
1. Select a channel to be deleted from included channel.
2. Click Remove (R) key.
5) Transpond
l Define whether a user can perform transmission in his (her) channel during scanning. If
this feature is disabled, the two-way radio will perform transmission in the channel
specified by “specified TX channel” function.
6）Top priority channel
l Switch the scanning status of top priority channel on the highlighted channel in included
channels. When the status of top priority channel is set to the highlighted channel, the
status of top priority channel on the other channels (if any) will be removed. During
scanning, up to 50% scanning is performed in the top priority channel.
7）Second priority channel
l During scanning, up to 50% of scanning activities are performed in the top priority
channel. If there is a second priority channel, the scanning activity in the top priority
channel is reduced from 50% to 25%. If the two-way radio detects an activity in the
top priority channel, it will stop current transmission and sounding in the top priority
channel.
8）TX channel
l During scanning, if a user presses this key, the two-way radio will determine which
channel is used for transmission. If “Transpond” option is disabled, this feature also
defines that when the two-way radio stops scanning to sound legal members in the
scan list, if a user presses PTT, the two-way radio will perform transmission in the TX
channel. Any channel can be used as a specified TX channel. In addition, a user can
select a selected channel.
9）Priority sampling time (ms)