User's Manual

24
To delete a Scan List:
Right-click an individual Scan List of the Tree View.
Select Delete.
3. Hang Time (ms)
Sets the time the radio will remain on a scan list member channel following the end of the channel
activity. The hang time prevents the radio from resuming scanning until the conclusion of the response
to the initial call. The timer starts at the end of a transmission and resets whenever a valid activity is
detected on the channel during the hang time.
Range
Maximum 10000 ms Minimum 500 ms Increment 500 ms
4. Priority Alert
This is an alert tone that the radio emits when it unmutes to a priority channel during a scan operation.
Scan group function
Adds channel(s) from the Available list into the Members list. Channel(s) in the Members list will be
scanned for transmission activity during a scan operation. Channel(s) added to the Members list will
be removed from the Available list. A maximum of 15 channels (including the Selected channel) may
be added to a Members list.
1. To add a Scan List:
Right-click the Scan folder of the Tree View.
Select Add->Scan List.
Give the list a unique name.
Deleting Scan Lists
2. To delete a Scan List:
Right-click an individual Scan List of the Tree View.
Select Delete.
3. Adding Scan Members
Select channel(s) from the Available list and click option “add”(A)
4. Removing Scan Members
Select the selected channel(s) from the Members list. and click option “Remove”(R), the channel will
return to the Available list.