User's Manual

17
Functions and Operations
Scan
Scan is useful for monitoring signals on the radio channels, the channels
include in the scan list. While scanning, the radio checks for a signal on each
channel and only stops on a channel if a signal is present. Press programmed
Scan on/off key to begin scanning, while scanning on, a “scan on” sounds,
LED indicator flash red. While scanning off, a “scan off” sounds
Via programmable software to set it: Scan folder( Scan hang time) → A
desired scan list → add available channel to members channel → a digital or
analog channel to select scan list
● Scan Hang Time : When a signal is detected on a channel, scan pauses on
that channel, the radio will remain on the busy channel until the signal is no
longer present. When the signal “ drop out” the radio will remain on the
channel momentarily before scan resumes. The delay time is programmed 500
to 10000 milliseconds.
●Talkback : When a signal is detected on a channel, scan pauses on that
channel, press PTT key can talk back on the channel if enable “Talk Back’
feature; if “Talk Back” isn’t checked, press PTT key may talk back on the
designated channel.
●TX Designated Channel : During scanning, Press PTT key will transmit on
TX designated channel. You can set TX Designated Channel as Last Active
Channel, Selected channel or a desired channel from scan list.