User's Manual

18
Auto Scan
If Auto Scan feature is enabled for a channel, the radio will automatically enter
scan mode when it is switched to this channel. To stop scanning, press
programmed Scan On/Off key or switch to other channels. If return to the
channel will enter scan mode directly.
Monitor and Permanent Monitor
Monitor: On analog or digital channel, enable the Monitor feature to monitor
current channel activities and receive weak signals. Press the programmed
Monitor key to activate the monitor function, if a signal is detected, until the
signal is no longer present the radio will exit monitor mode.
Permanent Monitor: Permanent monitor feature is the same as monitor, but
long press the Permanent Monitor key to enter monitor mode, the radio will
remain on monitor mode until long press it again to exit.
Message
On digital channel, you can send preset messages by programmed one touch
call key. Edit message text via programming software, the message list save
up to 10 entries, and each of a message contains 140 characters at most.
One Touch Call
On digital channel, one touch call feature contains: to send messages or
transmit to a group call contact, to send messages or send call alert and