User's Manual

23
VOX
If enable VOX feature you can enjoy hands-free communication, the radio will
automatically begin transmitting when you speaking, and terminate
transmitting when you stop talking with no need of PTT press. You may set
VOX level as1~8 or disable (Off). When the environment too much noise, VOX
level will be higher, when the environment is quiet, VOX level will be lower. It
allow user to set VOX delay as 500 to 10000 milliseconds. If the VOX level is
set as off via the programming software, press programmed VOX on/off key
can’t enable VOX feature, if the VOX level is set as 1 to 8, press programmed
VOX on/off key can enable or disable VOX feature
Via programmable software to set it: General Settings folder →VOX level→
VOX delay(ms)
Note: The VOX feature shall work with a dedicated earpiece.
Warning Tones
Voice Indication
If enable voice indication feature, the radio will give tone indication for channel
change, zone change, power level switch, scan feature enable or disable, VOX
on or off, low battery alert, repeater mode or talk around mode switch and etc.
Channel Free Indication
On digital mode, if enable Channel Free Indication feature, the receiver gives a
high-pitched tone indication while the transmitter release PTT key to stop