User's Manual

25
transmit. There are three options available: always, color code free, channel
free, if choose always, whenever press PTT key to transmit directly; If choose
color code free, you will be unable to transmit on the channel if the color code
is already in use; If choose channel free, you will be unable to transmit on the
channel if it is already in use. If the channel is busy, press PTT key a
low-pitched tone will sound.
Via programmable software to set it: Channels folder → Zone → a digital
channel → TX Parameters → Admit Criteria
Battery Saver
This feature allows an idler radio to automatically enter battery saver mode,
the mode will extend battery service life, but response time may be delayed.
You can set battery saver time ratio as : 1:1、1：2、1:3、1:4, the time rate is
smaller, the power saving more evidently.
Via programmable software to set it: General Setting folder → Battery Saver
Lowery Battery Alert
When your battery gets low, LED indicator glows red and with a warning tone:
“Please Charge”，please replace the battery or charge the battery in time. The
radio will turn off automatically while battery is too low.
Via programmable software to set it: General Setting folder → Tone Alerts →
RX low battery interval (sec)