User's Manual

1）Scan List
 Link the sc
an lis t to th e channel. All m embers will be sc anned in th e lis t
during scanning. A use r can select any available scan list (including auto
scan). If the channel scans no scan list, pressing the scan switch will prompt a
user with an invalid key tone.
2)
Auto scan
 Enable a tw
o-way radio to start auto scan when a user selects th e current
channel. If auto scan is disabled, a user can still call scan feature by long
press or short press of programmable key (scan ON/OFF) or Scan in the sca n
menu; this option can be set only by programming operations.
3）Color code
 This feature enables a color code to be assigned to a specified channel. A
color code for each channel may be same or different. Each repeater can only
have one color code. Dif ferent color codes are used to identify dif ferent
systems. Switch channels by using different color codes. This feature enables
a two-way radio to roam between dif ferent system s. A two-way radio uses
different color codes to scan different channels. It ranges from 0 to 15.
4）Repeater Time Slot
 Digital time division multiple access (TDMA) technology divides a 12.5 kHz
channel to two alterna ting time slots, which bear one call respectively when