User's Manual

working in repeater mode. Thus, A digital repeater channel can be
com
pletely described only when set frequency and s et tim e slot are
simultaneously specified. The intercom munication two-way radios or groups
should have the same frequency and time slot.
 Notes:
 This feature applies only in repeater mode.
 Regardless of the time slot being monitored in repeater m ode, i.e. time slot 1
or 2, the two-way radio will always monitor two-way radio s transmitting in
talkaround mode. RX t wo way radio in talkaround m ode will m onitor all
talkaround calls and repeater calls in the configured repeater time slot.
5）ARS
 None
6）Talk-around Allowed
 During transm ission, use RX param eters instead of TX param eters. The
feature enables adjacent two-way radios to rea lize communication withou t a
repeater, es pecially f or a s ituation th at two-w ay rad ios are adjacen t and a
repeater is beyond the range. The feat ure can switch betw een repeater and
talk-around m odes by short press or long press of programm able key
(repeater/talk around) or talk around (Setting menu).
Note: For a digital two-way radio, th is feature shall be enabled and TX
frequency is different from that of RX.
7）RX only

C
onfigure a channel to RX only and disable any TX feature. All RX features for this channel
also shall be disabled.
8）
R
X frequency
 Set the signal RX frequency of the current channel in MHz.
9）Offset
(MHz)

C
reate TX Frequency. The method is to add offset value to RX Frequency, which can ensure
consistence of offset of the two-way radio and that of the repeater. A user can input up to 14
numbers or characters, including decimal point and minus sign. Click “Cloning” key to set
the TX terminal.
10) Mapping