User's Manual
Priority 2
This scan group will be scanned in
the second priority
Priority OFF
Disable scan priority for scan groups
Scan group 1 (channel 1)
Edit channel 1 in scan group 1
Editing p
riority Edit channel priority in the scan list
Delete
Delete channels in the scan list
Scan setting
Settings for programming software
Left click “Menu Definition” to check “Scan ON/OFF” and “Editing List”
options under “Scan”, and then select “Scan Group” in the “Scan List” on
the “Channel” editin g interface.
Manually set channel scan
1、Click “MENU” key to access the function list.
2、Select “Scan” and press “OK” key to enter “Scan” editing interface.
3、Press “—” to select “Open” option and press “OK”, and the two-way
radio enters scan mode.
4、To exit from the scan function, repeat above steps, and select “Close” and press
“OK” ke y.
Manually set scan group/scan channel priority
If channel 1 of the preset “Scan Group 1” is “Priority 1”, and channel 2 is
“Priority 2”, to change them to “Priority 2” and “Priority 1” respec tively:
1、Enter “Scan” editing interface.
2、Press “—” key to select “View/Edit List” function and press “OK”
key to confirm it.
3、Press “—” key to select “Channel 2”, select scan group/channel and press