User's Manual

“OK”
key to confirm it.
4、Select “Edit Priority” and press “OK” key to confirm it.
5、Press “—” key to select “Priority: 1” and press “OK” key to confirm it.
Then the priority of channel 1 is “OFF” and the priority of channel 2 is “1”.
6、Repeat above steps to set the priority of channel 1 and select channel 1 “Priority:
2”.
Note: “Scan Group *” of the channel shall be preset in the programming software.
The scan list of the scan group can be se t only when the two-radio switches to the
channel.
Manually add a scan channel
1、Enter “Scan” editing interface.
2、Press “—” key to select “View/Edit List” function and press “OK”
key to confirm it.
3、Press “—” key to select “Add a Scan Channel” and press “OK” key to
confirm it.
4、Press “—” key to select “Channel *”, press “OK” key and enter the
priority editing interface of the added channel.
5、Press “—” key to select “Priority 1, 2, Off” and press “OK” key to
confirm it.
Manually delete a scan channel
1、Enter “Scan” editing interface.
2、Press “—” key to select “View/Edit List” function and press “OK”
key to confirm it.
3、Press “—” key to select “Channel *”, and press “OK” key to confirm
it.
4、Press “—” key to select “Delete”, press “OK” key for confirmation, and
enter the “Delete Items” editing interface to determine whether to delete the scan