User's Manual
5、Press lef
t and right “—” key to select “Talk-around” or “Repeater mode:
2” and press “OK” to confirm it.
High/low power setting
Settings for programming software
In the “Channel Editing” interface, under TX section – “TX power”, drop
down “High” and “Low” options to preset high/low TX power for the
two-way radio.
Manually set the two-way radio
1、Enter “Two-way radio setting” option.
2、Press left and right “—” key to select “TX power” and press “OK”
key to confirm it.
3、Press left and right “—” key to select “High” or “Low” and press
“OK” key to confirm it.
Note: If it displays “High”, it means that the two-way radio is in high TX power
state. Press “OK” key to set the two-way radio to “low” TX power state.
Special Features
Remote Monitor/Destroy/Activation
1、Left click “General Setting” in the tree view to enter “General Setting”
editing interface.
2、In the “Signaling System” e diting interface, under “General Setting” ,
check “Remote Destroy Decoding”.