User's Manual

Char
ging
After the
charger is energized, t he c harger i ndicator lights green. Install t he battery pa ck,
contact pro perly, an d th en the re d i ndicator is o n t o st art ch arging. After the b attery is fully
charged, the green i ndicator is on. If t he temperature is beyond the allowable range during
charging, the red indi cator flashes; if t he batt ery is dam aged or po orly con tacted, the re d
indicator flashes.

Instal
lation/Removal
1. Ge
ntly press the battery pack into the rear of the product and push horizontally it till you
hear “click” until the battery is locked by the latch at the bottom of the rear of the product.
2. To remove the battery pack, press the latch at the bottom of the rear of the product and lift
it off.

Antenna
Grasp the a
ntenna base, and turn the antenna clockwise to the connector on the top until it is
tightened.

Belt clip
Instal
l it along the slot till you hear “click” until it is locked by the slot.

Harness
Pass the
harness through the runner on the top.
 Do not hav
e battery terminals short circuited and do not put the battery in the fire.
 Do not remove the case of the battery pack.

Do not install
the batter y pack in a dang erous environment; otherwise, spark may re sult i n
explosion.