User's Manual

Retur
n to the previous operation
□ OK key
Confirm
ation key
□
Left key
Mov
e to the left side
□
Right key
M
ove to the right side

Power ON/OFF
Rotate Power switch/Volume controller clockwise to switch the power ON.
Rota
te Power switch/Volume controller counterclockwise to switch the power OFF.

Adjust volum
e
Rota
te Power switch/V olume control ler to reg ulate the volume. Rotate i t cl ockwise t o
increase the v olume, i.e. t he vo lume status bar sh owing full . Ro tate it co unterclockwise t o
reduce the volume, i.e. the volume status bar showing null.

When
communicating with the other party, it is required to adjust volume accurately.
Note: when
regulating the volume, the volume of channel reporting number is not controlled.

Channel Selection
Rota
te the channel selector - channel 1—16:

Rep
orting number: rotate the c hannel se lector an d t he tw o-way radio br oadcasts the
current channel in a voice manner or dis plays the curr ent channel, where it is l ocated,
magnitude of power, received or transmitted frequency on the screen.

Make a Call
1) Press PTT
switch and talk to the microphone, the red indicator is ON;
1） Keep the voic e source about 3-4cm away fro m the microphone and talk a normal
tone to allow the receiving station to obtain the best voice quality.
2） When pressing PTT switch, the red indicator is ON.
3） When pressing PTT switch, call type and call number display.
2) Release PPT switch for receiving signals.

Receiving
When
the channel you are using is called, the green indicator is O N. This call can be heard
only when t he right c ode i s recei ved. After receiving the si gnal, t he two-way radi o wi ll
display receiving frequency, call type and number of the calling party.
 Receiving Alarms

Em
ergency alarm indi cation: check if t he tw o-way radi o sen ds au dio or vi deo indication
after an emergency alarm is received. If this check box is not checked, the two-way radio
will not display any information when receiving the emergency alarm.

Em
ergency alarm confirm ation: check if t he two-way radio se nds out au dio or v ideo
indication aft er an em ergency al arm is received. If t his check box is not chec ked, t he
Basi
c Operations