Installation Instructions

11
damage due to over-discharge.
2. Recharge a battery after several months’ storage, to avoid battery capacity
reduction due to over-discharge.(NI-MH batteries:3 months, Li-Ion&
Li-polymer batteries: 6 months)
3. Store your battery in a cool, dry place under room temperature, to reduce
self-discharge.
Charging the battery
Use only the charger specified by the manufacturer, the charge indicator
indicates the charging progress.
Charger Status Charger Indicator
Standby(No-load) Charge Indicator glows green
Battery is charging Charge Indicator glows red
Battery is fully charged Charge Indicator glows green
Charge Steps:
1. Plug the AC connector of the switching power into the AC outlet socket.
2. Place the battery or the radio is attached with a battery in the charger.
3. Making sure the battery is connected to the charger, the charging process
initiates when the charger indicator glows red.
4. The charger indicator glows green when the battery is fully charged, please
remove the battery then.
Note: While charging the temperature out of the limit the LED indicator of charger will flash
red and green; if battery has damaged or battery is not connected to the charger correctly,
The LED indicator of charger also will flash red and green