Installation Instructions

transceiver will restart automatically and then input password again . When 3 times

wrong in input password continuously, after it transceiver must be kill, only reprogram it

then device work normal. Please enable power on password with due care.

Adjusting the volume

After the radio is power on, you can rotate the power switch/volume adjust

keys to adjust the volume level, rotate the knob clockwise to increase the

volume, or rotate the knob anti-clockwise to decrease the volume.

Selecting a Channel

Turn the channel selector knob to select channel 1 to 16, rotate the knob

clockwise to increase the channel number, or rotate the knob anti-clockwise to

decrease the channel number, while enable all tone alert ,handover channel

will hear a channel number.

Note: If a channel is not programmed, the display appears：Un-programmed Channel and

prompt no channel, LED indicator flash red.

Selecting a Zone

The radio supports up to 64 zones, each with a maximum of 16 channels, 64

zones all support up to 1024 channels. You may select a desire zone through

enter zone menu or setting zone selection function to orange button, button 1

or button 2, then handover zone. While enable all tone alert, select zone will

hear a channel number.