Installation Instructions

22
●
Remote Monitor: Allow a user to send a "Remote Monitor" request to the
target device via menu. If the request is successful, you can enable the
microphone of the target radio, and monitor its activities. Only the target radio
is set remote monitor decode, that enable monitor its activities.
●Remote Revive : Allow a user to send " Remote revive " command to the
target killed device, to allow it to be used normally.
●Remote Kill: Allow a user to send " Remote kill " command to the target
device via menu. If the device is lost or stolen, a user can use this function to
disable the device. However, this device will continue monitoring air interface
to receive its " Remote revive " command.
●Edit: Modify the number or name of a private call contact. Press” *” key to
delete, press “#” to switch input method, the available number range is
1~16776415, name input 16 characters at most.
●Delete: Delete unwanted contacts from the address list, if private call contact
is set as channel default address or call number on one touch call, its unable to
delete.
3. All Call（）
While the contacts type as all call, you can select the menu to view its ID or
press PTT to call.
4. Manual Dial