Installation Instructions

You can manually input the private call number for calling or sending call alert ,

send message ,radio check, remote monitor , remote revive , remote kill.

5. New Contact

You can add a private call contact to the contact list. When input number, the

available number range is 1~16776415, then edit name, press”*” key to

delete, press “#” to switch input method, name input 16 characters at most.

After add a private call contact successfully, on contacts list will show new

contact.

Scan

1. Scan On/Off

While current channel add scan list and the list contain 2 channels at least,

you may enable the feature. Scanning allows the device to search the scan

list connected to the current channel to locate qualified channel for receiving

or voicing. During scanning, the icon “ ”appears, when activities are

detected on a channel, the radio will stay on the channel to receive current

activities. If you don’t want to receive activities on the channel, press the

programmed Nuisance Delete key to remove the channel from the scan list

temporarily. To exit the scanning process, enter scan menu, switch channel

or press the programmed Scan key.

Note: