Installation Instructions

27
●
Backlight: To set the backlight parameters, you can select enable or disable,
while you select enable, the light will become dark after 5 second you don't
operate the key and the light will go out immediately while you select disable.
●Boot Display: Allow a user to enable or disable the boot screen via menu. If
the Intro screen is enabled, while the radio power on, the screen display
BelFone Logo and device name; while the Intro screen is disable, the screen
only displays device name.
●Keypad Lock: Allow a user to enable or disable keypad lock via menu. While
Keypad locked indicate: , that you can’t operate the keypad except PTT
key and orange button, button 1 or button 2. Press “MENU” and” #” key to
unlock.
●Language: The radio supports two languages: Chinese and English.
●LED indicator: To set whether to enable LED indication via menu. While
disable all indicator, the screen becomes dark and TX red indicator, Rx green
indicator, scan orange indicator are off. Please use this function with due care.
●Talk Around: When your repeater malfunctions, or when radio is out of
repeater’s range, you can continue to communicate in talk around mode. While
enable talk around feature, the screen displays: ，By this time TX
frequency the same as to RX frequency. If switch channel 、 enable scan
feature or restart radio will disable the feature.
Note：