Installation Instructions

3
This radio is designed for and classified as “Occupational/Controlled Use
Only”, meaning it must be
used only during the course of employment by individuals aware of the
hazards, and the ways to minimize
such hazards; NOT intended for use in an General population/uncontrolled
environment
– DO NOT operate the radio without a proper antenna attached, as this may
damage the radio and may
also cause you to exceed RF exposure limits. A proper antenna is the antenna
supplied with this radio by
the manufacturer or an antenna specifically authorized by the manufacturer for
use with this radio.
– DO NOT transmit for more than 50% of total radio use time, more than 50%
of the time can cause RF
exposure compliance requirements to be exceeded.
– This transmitter may operate with the antenna(s) documented in this filing in
Push-to-Talk and body-worn
configurations. RF exposure compliance is limited to the specific belt-clip and
accessory configurations as
documented in this filing and the separation distance between user and the
device or its antenna shall be
at least 2.5 cm.