Installation Instructions

30
●
Hot MIC Duration: If the emergency mode set as emergency alarm with voice
to follow, after send emergency information, your voice and background noise
to be transmitted automatically as you don’t need to press PTT key within hot
MIC duration.
Note: while the short press is set as emergency on, the long press will be set
as emergency off default.
Work Alone
This function is useful for persons who work lonely and encounter an incident;
you cannot press any keys or transmit audio within the preset period time. The
radio will alarm automatically to ask help. Via the programming software to
enable the feature, and setting work alone response time, work alone warn
time, work alone response operation.
Via programmable software to set it: Signaling Systems folder→Work Alone→
Work Alone Enable→Work Alone Response Time→Work Alone Warn Time→
Work Alone Response Operation
Monitor and Permanent Monitor
Monitor: On analog or digital channel, enable the Monitor feature to monitor
current channel activities and receive weak signals. Press the programmed
Monitor key to activate the monitor function, if a signal is detected, until the
signal is no longer present the radio will exit monitor mode.