Installation Instructions

33
indication for transmission on digital channel).
Via programmable software to set it: General Settings folder →Tone Alerts →
Voice Indication → Channel Free Indication → Talk Permit Indication
Lowery Battery Alert
When your battery gets low, LED indicator glows red and with a warning tone:
“Please Charge”，please replace the battery or charge the battery in time. The
radio will turn off automatically while battery is too low.
Via programmable software to set it: General Setting folder → Tone Alerts →
RX low battery interval (sec)
Time Out Timer (TOT)
The purpose of TOT is to prevent any user occupy a channel for an extended
period. If a channel is busy, the time will be shorter. If the preset time expires,
the radio will generate beep and terminate transmission automatically. Via
programming software, you can set TOT as 15-495 second.
Via programmable software to set it: Channels folder → Zone → A digital or
analog channel → TX Parameters → TOT-TOT Rekey Delay
TX Permission
Digital Channel
This feature can restrict the channel if it is already in use you will be unable to
transmit. There are three options available: always, color code free, channel