Installation Instructions

free, if choose always, whenever press PTT key to transmit directly; If choose

color code free, you will be unable to transmit on the channel if the color code

is already in use; If choose channel free, you will be unable to transmit on the

channel if it is already in use. If the channel is busy, press PTT key a

low-pitched tone will sound.

Via programmable software to set it: Channels folder → Zone → a digital

channel → TX Parameters → Admit Criteria

Analog Channel

This feature can restrict the channel if it is already in use you will be unable to

transmit. There are three options available: Off, Carrier, CTCSS/CDCSS, if

choose off, whenever press PTT key to transmit directly; If choose carrier, you

will be unable to transmit on the channel if the channel is being used by others;

If choose CTCSS/CDCSS, you will be unable to transmit on the channel if it is

already in use and the CTCSS/CDCSS code in use. If the channel is busy,

press PTT key a low-pitched tone will sound.

Via programmable software to set it: Channels folder → Zone → An analog

channel → TX Parameters → BCL

Analog Mode

On analog mode, the radio only supports three basic parts to operate, the

menu including scan, zone, settings, Voice Records.

●Squelch Level: On the analog mode, this feature allows you to adjust the