Installation Instructions

35
squelch threshold required for the radio to un-mute. You can set SQL 0~9,
Level 3 is set to its basic setting.
Bandwidth
On analog mode, there are two types of bandwidth available, you can choose
bandwidth as wide (25 KHz) or narrow (12.5 kHz) via programming software.
Via programmable software to set it: Channel folder →
Zone → An analog
channel
→Bandwidth
CTCSS/CDCSS
On analog channel and digital analog compatible channel, you can set unique
CTCSS/CDCSS to guarantee the privacy of your communication, on digital
compatible analog or analog compatible digital channel there must have a
CTCSS/CDCSS. If CTCSS/CDCSS has been set on the current channel,
CTCSS/CDCSS match is required for the radio to receive an incoming signal.
You can select a CTCSS/CDCSS from CTCSS frequency table or CDCSS
code table, or input non-standard CTCSS/CDCSS manually.
Via programmable software to set it: Channels folder→ Zone→ An analog
channel→ TX Parameters to select encode→ RX Parameters to select decode
●Decode: Only when receiver receives a call containing matching the decode,
you can hear the call;
●Encode: Signal that you transmit will only be heard by parties whose