Installation Instructions

Precautions

It’s important that the operator is aware of and understands hazards common

to the operation of any radio .Please observe the following safety precautions

to prevent radio damage or personal injury. The following precautions shall be

observed during operation, service and repair of this radio.

◆The recommended usage rate is 1 minute for TX and 4 minutes for RX,

when the radio is used for transmission for many hours continuously, the

radiator and chassis will become hot, allow the rear panel of the radio to

contact surface of low melting point /low Ignition point object;

◆Don’t leave the transceiver in direct sunlight for a long time, don’t place the

transceiver on extremely heat, damp, dusty area, and don’t put it on unstable

surfaces;

◆When restriction or warnings are posted regarding the use of radio devices,

please obey the regulation turn the transceiver power off;

◆Use of the radio while you are driving may be against traffic laws, please

prohibit using it ;

◆If you notice any problems on the radio, please turn off at first. Then contact

with local dealer. Do not modify this radio unless instructed by this manual or

refer service to a qualified licensed or certified technician only;

◆If you want to use the machine for secondary development, please contact

with BelFone’s technical engineer or dealer for technical assistance;

◆Please keep the surface of radio is clean and dry, clean the radio using a

cloth moistened with clean water and a mild dishwashing liquid.