User's Manual

16
●
High/Low Power: User can switch the Tx power level between high and low
power by pressing the programmed High/Lower Power key.
●Repeater/talk around：Allow radio set to connect through repeater or achieve
standalone communication in talk around mode.
●
Vox on/off: If set vox level as 1 to 8 via programming software, press the
programmed VOX on/off key to enable or disable the VOX feature. Press to
activate the VOX feature a VOX on sounds; disable the VOX feature a VOX off
sounds.
Note: Plug the dedicated earpiece into the accessory jack of the radio, the VOX feature is
effective.
●
Nuisance Delete: While scanning on, If you don’t want to receive activities on
the channel, press the programmed Nuisance Delete key to remove the
channel from the scan list temporarily. When restart scanning, the nuisance
channel will return to scan list.
●Permanent Monitor: Permanent monitor feature is the same as monitor, but
permanent monitor feature only can be set as long press key. And you should
long press the programmed Permanent Monitor key to exit this feature.