User's Manual

20
Then the programmed key set as one touch call, press the programmed key to
send a message to a private call.
●Call Alert
On one touch call menu, the call member select private call contact, and the
call type select call alert, then the programmed key set as one touch call, press
the programmed key to send call alert to a private call.
Talk Around
Talk Around: When your repeater malfunctions, or when radio is out of
repeater’s range, you can continue to communicate in talk around mode. While
enable talk around feature, by this time TX frequency is the same as to RX
frequency. Press the programmed Repeater/Talk Around key to switch
between repeater modes and talk around mode. Switch to talk around, a “talk
around” sound; switch to repeater mode, a “repeater” sounds.
Via programmable software to set it: Channel folder → Zone → a digital or
analog channel → Allow Talk Around
Note：To enable this function, TX frequency should be different from RX frequency, and
the channel will set as allow talk around on the programming software.
TX Power
You can switch power levels to Low or High. If you communicate with radio
located at a distant place please select High power; if you communicate with