User Manual

32
Note: This menu is effective if power on password is set via programming software.
●
Boot Interface: Allow a user to enable or disable the boot screen via menu. If
the Intro screen is enabled, while the radio power on, the screen display
BelFone Logo and device name; while the Intro screen is disable, the screen
only displays device name.
●
Covert Mode: If enable covert mode function, the radio will be totally silent
without any UI indication. Via the programming software you can set other
convert item, there are: LED, Keypad Lock, Backlight, Vibration.
●
Lone Worker: To enable or disable lone worker function via settings menu
●
TX Power : Allow a user to change the power level, there are two levels
available: high (indicated by ) and lower (indicated by ).
●
Talk Around: When your repeater malfunctions, or when radio is out of
repeater’s range, you can continue to communicate in talk around mode. While
enable talk around feature, the screen displays: ，By this time TX frequency
the same as to RX frequency. If switch channel, enable scan feature or restart
radio will disable the feature.
Note:
●
To enable this function, TX frequency should be different from RX frequency, and
the channel will set as allow talk around on the programming software.
●
Press the programmed Talk Around key to switch DM mode and RM mode.