User Manual

38
 Press the programmable button programmed as [Lone Worker On/Off] to
disable it
 Via the programming software, Lone Worker On/ Off item is not checked
Man Down
When this feature is enabled, the radio automatically sends an alarm for help if
it is positioned aslant or keeps motionless long time. If the trigger type is set as
Only Lean, the radio tilts to a specified gradient（30°,45°,60°）within a preset
period, the radio gives alerts, you can terminate such alerts by put radio
upright otherwise it will enter Emergency mode; If the trigger type is set as
Only Motion Detection, the radio stays motionless within a preset period, it will
enter Emergency mode, via the programming software to enable this feature
and to set parameters.
1. There are three modes to enable man down feature:
Go to [Settings] menu [Settings]  [Man Down]On
 Press the programmable button programmed as [Man Down On/Off] to
enable it;
Via the programming software, Man Down On/ Off item is checked
2. To disable man down feature:
 Go to [Settings] menu [Settings]  [Man Down]Off