User's Manual

12
None IP interconnection function is disabled
Peer Set to slave (registration of the master repeater
required)
Master Station Set to master (waiting for slave repeater registration)
Master Repeater
Backup
A type of slave repeater that will automatically become a
master repeater when the master repeater fails.
Master Station:
In IP multi-site connect system, it is permitted to configure only one master
repeater, while other repeaters shall be configured as slave repeater, with IP
addresses registered with the master repeater for IP interconnection.
Backup Master Repeater:
The backup master repeater is a slave repeater. In a system, it is permitted to
configure a backup master repeater, which in normal operating conditions is
the same with other slave repeaters. Only when the master repeater fails and
cannot be connected, the backup master repeater will act to play the role of a
master repeater in lieu of the original master repeater for registration of other
slave repeaters.
Peer:
The peer is a slave repeater, in a system, it is permitted to configure multiple
slave repeaters. Upon programming software, it is required to configure slave
repeaters, the backup master repeater and the current repeater’s IP address
for successful registration with the master repeater.