Hl Packing list Please check whether complete components including followings: (1)HS POS Machine set (2)Power Adapter codpiece (3)Lithium Battery 1 Piece (4)User's Manual 1 Piece (5)Thermal Paper Ferrell Hl Attentions 1.Safe Attentions: This machine can only work with the specified power adapter. Do not replace it with other power sou toes, otherwise it may cause the machine to work improperly and coven damaged! O Attentions of using battery: *This machine can only work with tho specified battery.
HE Product appearance 1.Paper caver handle NFC induction Zane 2 Paper cover 3 Indicator light 4 Display screen 5.Card lot keypad area TIC card interface 8.COM interface: 9. Micro US interface 10. Camera (optional feature) 11.
HW Battery installation and charging Ta stall and replace the battery 1.The product only cen be used after the battery is installed; 2.Please uso the origins] battery from Fujian More fun Electronic Technology Co., Lid.s 3.Make sure to follow the installation diagram snd incorrectly operation may cause battery damaged; Battery Charging: 1.Confirm that the battery has been already assembled; 2.
M Install STM and SAM Card 1.Remove the battery cover and lithium battery : 2.Come out SAM and SIM. cassette (as the picture shows ); 3.Take SIM card as an example, put the STM card chip contact side toward the battery compartments, Pugh into the SIM cassette from top to bottom, sad ‘must be inserted into the bottom to ensure good contact; 4.Tho same installation of SAM card as SIM card, located on the right of STM cassettes 5.
M Install printing paper 1.0pen the printer cover; 2.Place the paper correctly according to the hint inside the print compartments, and set aside a few centimeters of paper outside. 3 Put down the cover, make sure the left and right alignment and do not shake; Push back and fastening as shown in below picture; 4.
Hl Teller operation on IC card. magnetic card and RF card 3 1.When inserting the IC card, put the IC card contact surface (chip) face up and insert into the POS in the direction of the IC card arrow, 2. When swiping the magnetic ard, the magnetic side tam left and the magnetic track face towards display serene. The card should be tightly inserted into the POS by sticking card slot and keep the constant speed ag possible. Yon can swipe the card from the top to bottom or from bottom to top . 3.
