Press [ MENU/LOCK] , turn clockwise or counterclockwise [DIAL] , cons to MENU [13] WIN. Press | MENU LOCK] , tum clockwise or counterclockwise [DIAL], oor to MENU[14] SAVE. Press | MENCKEN] , tum clockwise or counterclockwise [DIAL], come to MENU [15] TOT.
. OPERATION POWER ON/OFF 4.Ba sure the Battery Pack is instated, and the patter is fully charged. Connect the instants to ihe op panel ANTENNA jack 2. Press ard hold he key [ ON/OFF 1 the current DC supply voltage will sapper on the LCD for 2 seconds, and beeps wil be heard, the display will serums its nominal indication of the operating frequency. 3% tum the transceiver off, press and hold the key { ON/OFF] again for one second.
Key: luminescent fe LCD when any key pressed. Oh: ruminates the LOD continuously. OFF: Disables the LOD lamp. Hess is the procedures for settling up the Lamp mode: harass | MENCKEN] , rotate the [DIAL] knob, come fo MENU [4] LIGHT. heathen press | UY | key to ante the sst made, Clockwise or counterclockwise relation of bn [ Dist. § knob to 3st CNIOFFKEY Press [UN] hey Io save the salting.
#)Pres [ MENU LOCK] or [PT, EXIT 10 normal operation. NOTE: Grade 7-8: ihe Most Sensitive VOX Gain Level Set under aslant conditions. Grade 4-8: the Medium Sensitive VOX Gain Lavoisier under common conditions. Grade! -3: the Least Sensitive VOX Gain Level Bat under too much lens conditions. When VOX function is activated, the LOD will display tha ICON VOX.
increments, the procedure & do is very secy. )Cross [ HEMLOCK ] , rotate the [DIAL } knob, come fo MENU [9]: STEP 2¥Then pass [UV | key to enter the set mods. clockwise or counterclockwise rotation of [DIAL § knob to select the new frequency step size {12.5225KHz) #Press [Uv ] key to save the setting.
WIN (Wide/Narrow Band Selection) Jurassic { MENCKEN ] | rotate the [Dial] knob, come 5 MENU [13]: WN 2)Then press [ UAV | key to enter tha set mode. clockwise or counterclockwise rotation of [ Dial } knob fo select the WIDE/NARROW: Grass | UV | key to save tha settling Si Press [ MENU LOCK or [PT, EXIT to normal operation, NAVE (Battery Saver) Tha UVULAR in Saver, which output level when the last signal received was very strong.
ELAM {Repeater Sound Response} The comas with the Repeater Sound Response feature. When the feature is activated, the handheld transceiver will hear the sours from the repeater, that means the handheld transceiver is working via the repeater. Please sae below to activates the features: f}Press | MENU LOCK ] , rotate the [Dial } knob, cons ke MENU [17]: RELAY heathen press { UA § key to enter the ast mode.