User's Manual

1. On standby mode, press + + to enter, the LCD shows "TOT.***".
2. Press or to choose time-limit level. The TOT of this radio may set 60-
540seconds, and has 1-9 grades, level 1 is 60 seconds, level 2 is 120 seconds, infer
from this. OFF is turning off.
3. After setting, press to confirm. Press or PTT to return to standby mode.
1. On standby mode, press + + to enter, the LCD displays "BCL.***".
2. Press or to choose"ON" or "OFF".
3. After setting, press to confirm, press or PTT to return to standby mode
When this function is on, you may prevent interrupting other radios that are talking. If the
selected channel is being used by other radios, when you press PTT , the radio you use
will beep, and LCD displays "BUSY". Release the PTT , "BUSY" wil disappear and
return to receiving mode.
21
20
This function is to limit the continuous long-time transmitting. When the continuous
transmitting time exceeds the time you set, the transmitting will be stopped, and you
will hear a beep, LCD displays”OVER" (as picture 10).
Using this function, you may set deviation between receving and transmitting.
Generally, only repeaters use this. The frequency deviation of this radio is : 0-69.995MHz
1. On standby mode, press + + to enter, the LCD displays "0.00000".
2. Press numbers to input the frequency deviation you want to set. If you want to input
5MHz, input 0,5,0,0,0.
3. After setting, press . Press or PTT to return to standby mode.
F
0
S
E
T
2
R
X
.
T
M
R
/
V
F
O
F
NOTICE
Setting direction of freqeuncy deviation, please see Menu 4.
F
0
S
E
T
3T
X
.T
M
R
/
V
F
O
F
Busy Channel Lock (BCL)-----Menu 12
NOTICE
The turning-on of this function may affect your normal talk.
H
Picture 10
M 06 over
M 01 46.0250 0
Time-Out-Timer (TOT)---Menu 13
F
0S
E
T
4R
P
T
M
R
/
V
F
O
F
Channel Display Mode (DSP)-----Menu 14
Using this function may choose the LCD display in your favor.
1. On channel mode, press + + to enter, the LCD displays"DSP.**"
2. Press or to choose, there are 3 display ways to choose.
5
V
O
X
F
0
S
E
T
a. CH: channel number display ( as picture 11).
b. FR: channel frequency+channel number display (as picture 12).
c. NA: channel name+channel number display ( as picture 13).
3. After setting, press to confirm, press or PTT to return to standby mode.
M
R/
V
F
O
F
NOTICE
H
Picture 11
ch - -06
ch - -0
M 06 440.02500
M 01 46.0250 0
M 06 QFC
01 CH--0
This function is invalid on frequency mode.
The display of channel name can't be shown until channel name edit is finished,
otherwise it would display as channel number. For steps of channel name edit,
please see Menu (25).
H
Picture 12
H
Picture 13
Priority Scan (PCH)-----Menu15
Using this function may monitor the channel and frequency usage of other radios and
check the activity of a prior channel/frequency.
Example: if the radio sets 5 channels, you want to set CH-00 as priority channel.
1. On channel mode, press + + to enter, the LCD displays "PCH.**".
2. Press or to choose "0" channel. LCD displays "PCH.0" or directly input number
0,0,0.
6SE
A
R
F
0
S
E
T