User's Manual

3. After setting, press to confirm, it would remind you whether you would delete.
LCD displays "DEL?"
4. If you want to delete, press to confirm again.
1. On standby mode, press + + to enter, the LCD displays "W/N.*".
2. Press or to choose W(wide 25k) or N( narrow 12.5K). After setting, press to
confirm. Press or PTT to return to standby mode.
22
23
3. After setting is finished, press to confirm. Press or PTT to return to standby
mode.
4. If you want upward priority scan, press + + . LCD displays "PRI.T". LCD
channel displays: 00→01→00→02→00→03 ......
If you want downward priority scan, Press + + . LCD displays"PRI.T". LCD
channel displays: 00→05→00→04→03→02 ......
M
R
/
V
FO
F
F
F
NOTICE
This function is invalid in frequency state
Scanning steps may refer to Menu (19)、(20).
Wide/Narrow Bandwidth (W/N)-----Menu 16
This fucntion is used to set the working band of radio.
F
F
7
R
E
V
F
0
S
E
T
M
R
/
V
FO
F
NOTICE
The radio normally uses wide band.
Channel Delete (DEL)-----Menu17
This function is used to delete channels and information of the radio.
1. On channel mode, press + + to enter, the LCD displays "DEL. 0H”
2. Press or to choose the channel you want to delete, or directly input number.
Example: If you want to delete CH-01, then input 0,0,1.
F
0
S
E
T
8
S
C
R
MR/
V
F
O
M
R
/
V
F
O
RESET---Menu18
1. On standby mode, press + + to enter, the LCD displays"RESET" ( as
picture 14).
2. Press to confirm, it will remind you whether to reset. LCD displays"SURE?"
3. If you want to reset, press to confirm
F
0SE
T
9
D
W
M
R/
V
F
O
H
Picture 14
RESET
M 01 46.0250 0
M
R/
V
F
O
NOTICE
After resetting, the channels and information that the radio has stored will all be
deleted and return to VFO mode.
Upward/Downward Scanning------Menu 19&20
Using this function may monitor the frequency of other radios, and check
the activity of a certain channel frequency.
1. On frequency mode, press + or is general scanning. According to
the step frequency you set, you may scan upward or downward.
2. On channel mode, press + or is general scanning. According to
the channel you set, you may scan upward or downward. Press again,
you may shift to priority scan.
F
F
F
NOTICE
For priority scan, refer to Menu 15.
Main/Sub Channel Shift----Menu 21