User's Manual

24
25
Using this function may shift between main and sub channels when in frequency or
channel mode. On standby mode, press + , the frequency or channel will shift
the top or bottom row. But the "↓"of the upper row main channel will not shift, the
frequency/channel that "↓"shows is still the main channel. (as picture 15)
H
M 06440.02500
M 01 46.0250 0
M 01 46.0250 0
M 06 440.02500
Picture 15
H
F
M
AI
N
Transmitting 1750Hz Call Tone-----Menu 22
This function is used to turn on a transmitting signal by European users.
Cross-Band Receiving/Transmitting Working Shift-----Menu 23
1. On standby mode, press +LED, the LCD displays "WX" (as picture 16). "↓
"shows receiving freqeuncy. Without "↓"is transmitting frequency.
2. Press to shift.
3. Then press +LED to exit the setting of this funciton.
Example: If the frequency of main channel is 148.875, the frequency of sub
channel is 468.875.
a. Press +LED, "↓"shows on main channel 148.875 (as picture 17). Now 148.875
is receiving frequency,while 468.875 is transmitting frequency.
b. Press , "↓"shows on sub channel 468.847 ( as picture 18) shows.
Now 468.875 is receiving frequency, 148.875 is transmitting frequency.
F
M
AI
N
F
F
Picture 16
H
M 06 440.02500
M 01 46.0250 0
wx
Picture 17
H
M 04 48.8750 0
M 03 468.87500
wx
Picture 18
H
M 04 48.8750 0
M 03 468.87600
wx
M
AI
N
NOTICE
FM radio: Only receiving is acceptable, see the FM radio frequency details Menu 33.
Once this function is on, other functions are invalid until you exit, and you’ll hear"beep".
Squelch Level Setting-----Menu 24
This function makes the squelch level"ON"or"OFF"via choose the signal level of radio.
1. On standby, press key + MON , the LCD will displays"SQL *" (as picture 19).
2. Press key or to choose the squelch level from 0-9.
F
Picture 19
H
SQL 4
M 01 46.0250 0
NOTICE
Setting the high squelch level will make failure receiving of weak signal, contrarily,
it will be interferred by other noise or signal if the squelch level is too low.
Channel Name Edit-----Menu 25
This function can enable you to edit your desired letters on the channel storing mode,
it's convenient to distinguish other users.
1. On the main channel mode, press + . (as picture 20).
2. Press or to choose the character,and then press to set next character.
The channel name makes up of the following:
26 letters: A - Z 10 numbers: 0 - 9 4 symbols: (-) (+) (*) (/)
3. Press to confirm and return to the standby mode.
F
BAN
D
B
AN
D
M
R
/
V
F
O
NOTICE
The channel name can edits as many as 6 characters. (Any 1-6 characters of
channel name is acceptable).
Choose the (-) symbol means this character is empty.
For channel name display see Menu 14.
Picture 20
H
M 06 UHF
M 01 46.0250 0