User's Manual

CHARGE BATTERY
1. As ①② shown, connect the charging cable to the power adapter, then
connect the power adapter to the AC power outlet.
2. As shown ③, Connect the charging cable to the charging port on the back
of the battery.
3. When the red LED is on, it indicates the radio is charging. When the LED
turns green, it indicates the charging is completed.
INSTALLING / REMOVING THE BATTERY
To install the battery, put the battery on the back or the radio, as shown in
①②. Push it horizontally along the slot to the top until it clicks.
To remove the battery, turn off the radio first , push the bottom battery safety
lock and remove the battery as shown in ③.
13
ｖ
ｗ
ｘ
ｖ
ｗ
ｘ