YT60165 Product specification Latest rev:00 File NO.
1、Main Features： Six Button：SET/CH，ALARM，UP/MEM，DOWN/RCC，NAP，SNZ/LIGHT Time display Calendar 12/24 hours system Symbol Radio Control RCC:DCF DST indoor temperature+ outdoor temperature Support 5 Language of display：English、German, French, Spanish, Italian Temperature in °C / °F Indoor temperature (-9 °C / 16 °F ~ +70 °C / 158 °F) Outdoor temperature (-20 °C/-4 °F ~ +70 °C/158 °F) Humidity(1%~99%) Single Alarm Snooze function，setting range 5~120 minutes Nap function，setting rang
. Power on & reset： Insert the battery; the LCD is fully displayed for 3 seconds, while the BI enters into the standard mode, and the backlight is on for 5 seconds. Default Display: Time：12:00 AM Date：2017.JAN.01 SUN ALARM：6:30 AM OFF NAP time：10minutes 4. Timing setting： In the standard mode, press the “SET” button for 2 seconds to enter the time setting, and the set unit will flash at 1HZ frequency.
mode directly. The alarm that has been set will be automatically turned ON. 6. Alarm clock mode Alarm time: 2 minutes The buzzer format is as follows: 0-10 seconds: one second per second 10-20 seconds: BI BI per second 20-30 seconds: BI BI BI BI per second Continuous BI sound after 30 seconds When the alarm is ringing, press the “SNZ/LIGHT” button to enter the 10-minute snooze function.
Automatically receive every day RCC reception time 7 minutes RCC's automatic receiving time is: 1:00, 2:00, 3:00, each time fixed reception, if received at 3 o'clock, the day will not receive, if not received at 3 o'clock, 4:00 , 5:00 will be replenished, no matter whether it is received at 5:00, the day will not receive RCC receiving graphics When entering RCC reception, the tower part of the RCC mark flashes at 1HZ frequency RC When the received signal is successful, the RCC receive flag will
there is function, there is button sound 12. Power on AC: In the standard mode, the backlight is long and bright, press “SNZ/LIGHT” to switch the order: light and dark When the backlight is off, press any key to backlight for 5 seconds. When there is function, there is button sound. 13. Low voltage function Low voltage indication: IC internal detection, low voltage symbol when battery voltage is lower than 2.
(2) this device must accept any interference received, including interference that may cause undesired operation. Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
