Product Description
3. Power on & reset：
Insert the battery; the LCD is fully displayed for 3 seconds, while the BI
enters into the standard mode, and the backlight is on for 5 seconds.
Default Display:
Time：12:00 AM
Date：2017.JAN.01 SUN
ALARM：6:30 AM OFF
NAP time：10minutes
4. Timing setting：
In the standard mode, press the “SET” button for 2 seconds to enter the
time setting, and the set unit will flash at 1HZ frequency.
Then press “set”button step by step：
languageBEEP ON/OFFTime zone 12/24HR hour minuteyear
monthdaytemperatureSNZ timeExit
During the setting process, press “UP” button once to set the value plus
1; long press to set the value to increase at 8 steps/second.
During the setting process, press the “DOWN” button to decrease the
value by 1; long press to decrease the value at 8 steps/second.
Setting is completed, single-press “SET” button or 20 seconds without
pressing any button to exit setting mode
In the setting mode, press the “SNZ/LIGHT” button to exit the setting
mode directly.
When BEEP (key tone) is set, press “UP” or “DOWN” to select ON/OFF
SNZ time setting range: 5~120 minutes, one unit every 5 minutes, default
10 minutes
time zone setting range: -12 ~ +12
5. Alarming setting
In the standard mode, press the “ALARM” button to view the AL alarm
time.
When viewing the time, press the “ALARM” button to turn the alarm on
or off.
In the standard mode, press the “ALARM” button for 1 second to enter
the alarm setting, and the set item will flash at 1HZ frequency.
Press the “ALARM” button to set the order: hour minute exit
During the setting process, press “UP” button once to set the value plus
1; long press to set the value to increase at 8 steps/second.
During the setting process, press the “DOWN” button to decrease the
value by 1; long press to decrease the value at 8 steps/second.
Setting is completed, single-press “ALARM” button or 20 seconds
without pressing any button to exit setting mode
In the setting mode, press the “SNZ/LIGHT” button to exit the setting