Product Description

mode directly.
 The alarm that has been set will be automatically turned ON.
6. Alarm clock mode
 Alarm time: 2 minutes
 The buzzer format is as follows:
 0-10 seconds: one second per second
 10-20 seconds: BI BI per second
 20-30 seconds: BI BI BI BI per second
 Continuous BI sound after 30 seconds
 When the alarm is ringing, press the “SNZ/LIGHT” button to enter the
10-minute snooze function.
 In addition to the SNZ button, press any button to stop the alarm or
snooze, whether it is ringing or snoozing.
7. Snooze function
 In standard mode, press the “NAP” button to enter the nap time and
start counting down.
 In the standard mode, press the “NAP” button for 1 second to enter the
nap setting, and the set item will flash at 1HZ frequency.
 In the setting process, press “UP” button once, set the value plus 5; long
press to set the value to increase at 8 steps/second.
 In the setting process, press “DOWN” button once to set the value minus
5; long press to set the value to decrease at 8 steps/second.
 nap time setting range: 5~120 minutes, one unit every 5 minutes, default
10 minutes
 The way to sound is the same as the alarm
8. Temperature and humidity function
 Indoor temperature detection range: 16～158°F (-9.0～70.0°C)
 The indoor temperature is less than 16°F and the display is 16°F, and
greater than 158°F is 158°F.
 Outdoor temperature detection range: -4F to 158°F (-20.0 to 70.0°C)
 Temperature is less than -4F °F shows -4F °F, greater than 158 °F
shows 158 °F
 Temperature resolution: 1 ° C / 1 ° F
 Humidity resolution: 1%
 Detection period: 30 seconds
 Temperature SENSOR: 49.12K (B=3979K)
9. RCC reception:
 RCC reception conditions:
 Automatically receive RCC after 3 minutes after power on or reset
 Press the “DOWN/ RCC” button to force the RCC to receive