Datasheet

– 1 –
AF3-175E
1. FEATURES AND USES
FUJICOLOR PRO 160 C PROFESSIONAL is an ISO film
speed 160 daylight-type color negative film designed
for professional use, featuring a gradation design
optimized for exposures requiring high-contrast results.
Through its use of Fourth Color Layer technology,
the newest emulsion technologies and new coupler
technology, this film boasts better grain quality and higher
sharpness than current films, enabling reproductions
with superb gray balance. As with FUJICOLOR PRO
160 S PROFESSIONAL, this film is expressly designed
for optimum scanning and single channel printing. PRO
160 C is a highly reliable film that supports a wide
range of photographic applications, including portrai-
ture, commercial work, fashion, and architectural and
interior photography. The further addition of single-
channel printing results in uniform printing efficiency
with other films in the FUJICOLOR PRO series.
FUJICOLOR PRO 160 C PROFESSIONAL
COLOR NEGATIVE FILMS
Features
•Wide exposure
..........
stability
• Neutral gray balance
....
• Fine grain quality
.........
• Addition of single-
........
channel suitability
Wide exposure latitude
producing less variation in
over- or under-exposed
frames.
Rich gradations from the
highlights to the shadows
and depiction of natural-
looking grays. Optimized
digital scanner suitability.
Grain quality raised to a
superior level. Higher grain
density in images for
enhanced textural depiction
of subject.
Negative density level
unified with other PRO
series films for maximum
printing uniformity and
efficiency.
2. ISO FILM SPEED
Notes
• The settings in the table above are for 2 hours after sunrise
and 2 hours before sunset.
• Since light conditions vary greatly for cloudy/bright and open
shade, use of an exposure meter is recommended.
• Close-up shots with backlighting may require a lens opening
adjustment of f1 to f2 stops.
Light Source
Daylight & Electronic
Flash
Tungsten Light
(3200K)
ISO Film Speed
160/23°
50/18°
equivalent
Color Balancing Filter
None
Wratten No. 80A
(or LBB-12**)
*Indicates the effective speed resulting from designated filter use.
**Fuji Light Balancing filter
3. FILM SIZES, EMULSION NUMBER, BASE
MATERIAL AND THICKNESS
Emulsion
Number
Size and Package Configuration
Roll
Sheet
902
–
135
...
36-exp.
120
...
12-exp. [6x6]
...
12-exp. [6x6] (5-roll pack)
220
...
24-exp. [6x6] (5-roll pack)
4 x 5 in. (10.2 x12.7 cm) QL (20 sheets)
4. EXPOSURE GUIDE
Use a meter to determine the exposure setting. If a
meter is not available, refer to the following table.
Daytime/Outdoors
Seashore
or Snow
Scenes
under
Bright
Sun
Bright
Sunlight
Hazy
Sunlight
Cloudy
Bright
Cloudy
Day or
Open
Shade
Lens
Opening
Shutter
Speed
(sec)
f/22
2
/3 f/16
2
/3 f/11
2
/3 f/8
2
/3 f/5.6
2
/3
1/125
Base Material Thickness
122µm(135)
Roll Cellulose Triacetate
98µm(120,220)
Sheet Polyester 175µm