Datasheet

– 1 –
AF3-174E
1. FEATURES AND USES
FUJICOLOR PRO 160 S PROFESSIONAL is an ISO film
speed 160 daylight-type color negative film designed
for professional use, featuring more highly optimized
skin tone reproduction and neutral gray balance,
especially important for portrait photography. Through
its use of Fourth Color Layer technology, the newest
emulsion technologies and new coupler technology,
this film is able to deliver better grain quality and
smoother skin tone reproduction than current films.
Moreover, thanks to its well-controlled gray balance, it
provides a wider exposure latitude that makes it more
suitable for digital scanners. The further addition of
single-channel printing results in uniform printing
efficiency with other films in the FUJICOLOR PRO series.
FUJICOLOR PRO 160 S PROFESSIONAL
COLOR NEGATIVE FILMS
Features
• Superb skin tone
..........
rendition
•Wide exposure
..............
stability
• Neutral gray balance
....
• Fine grain quality
..........
• Addition of single-
........
channel suitability
Smooth, extremely fine skin
tone rendition optimized for
portraiture.
Wide exposure latitude
producing less variation in
over- or under-exposed
frames.
Rich gradations from the
highlights to the shadows
and depiction of natural-
looking grays. Optimized
digital scanner suitability.
Grain quality raised to a
superior level. Higher grain
density in images for
enhanced skin texture
depiction.
Negative density level
unified with other PRO series
films for maximum printing
uniformity and efficiency.
2. ISO FILM SPEED
Notes
• The settings in the table above are for 2 hours after sunrise
and 2 hours before sunset.
• Since light conditions vary greatly for cloudy/bright and open
shade, use of an exposure meter is recommended.
• Close-up shots with backlighting may require a lens opening
adjustment of f1 to f2 stops.
Light Source
Daylight & Electronic
Flash
Tungsten Light
(3200K)
ISO Film Speed
160/23°
50/18°
equivalent
Color Balancing Filter
None
Wratten No. 80A
(or LBB-12**)
*Indicates the effective speed resulting from designated filter use.
**Fuji Light Balancing filter
3. FILM SIZES, EMULSION NUMBER, BASE
MATERIAL AND THICKNESS
Emulsion
Number
Size and Package Configuration
Roll
Sheet
502
–
135
...
36-exp.
120
...
12-exp. [6x6]
...
12-exp. [6x6] (5-roll pack)
220
...
24-exp. [6x6] (5-roll pack)
4 x 5 in. (10.2 x12.7 cm)
...
10 and 50 sheets
4 x 5 in. (10.2 x12.7 cm) QL
...
20 sheets
8 x10 in. (20.3 x 25.4 cm)
...
10 sheets
9 x12 cm
...
20 sheets
13x18 cm
...
20 sheets
Base Material Thickness
122µm(135)
Roll Cellulose Triacetate
98µm(120,220)
Sheet Polyester 175µm
4. EXPOSURE GUIDE
Use a meter to determine the exposure setting. If a
meter is not available, refer to the following table.
Daytime/Outdoors
Seashore
or Snow
Scenes
under
Bright
Sun
Bright
Sunlight
Hazy
Sunlight
Cloudy
Bright
Cloudy
Day or
Open
Shade
Lens
Opening
Shutter
Speed
(sec)
f/22
2
/3 f/16
2
/3 f/11
2
/3 f/8
2
/3 f/5.6
2
/3
1/125