User manual

12
EN
Taking Pictures (Continued)
Unloading the INSTAX mini film pack
⁄
~
Ÿ
When “ 0 ” is displayed on the film counter, unload the film
pack following the procedure below.
Press down the back cover lock to open the back
cover.
Grasp the rectangular holes on the film pack, then
pull it out straight.
Every time you take a photo, the number on the film
counter decreases from “10” to reflect the number of
remaining photos, and “0” is displayed when you have
used up the film pack.
When the film has been ejected (the camera stops making
a sound), grasp the edge of the film, then take it out.
• For details on taking out the film, refer to the instructions
and warnings on the FUJIFILM INSTAX mini film pack.
• The developing time is approximately 90 seconds. (The
time varies depending on the ambient temperature.)
When finished using the camera, always switch off to
maintain battery life. If the camera is left switched on for
5 minutes without being used, it will automatically switch
off.
BO-7_6lang.indb 12 2015/7/14 8:47:58