User manual
20
EN
Problems Possible Causes Solutions
The lm pack won’t load
into your camera, or won’t
load into your camera
smoothly.
1 The lm pack is not for your
camera.
2 You are not loading the lm
pack correctly.
1 Use FUJIFILM INSTAX mini lm only. (No other lms can
be used.)
2
Match the yellow line on the lm pack with the yellow positioning
mark in your camera. Follow the INSTAX mini lm pack instructions.
The lm cover cannot be
ejected.
● The battery power is low. ● Replace both batteries with new batteries and load the
lm pack again.
The LCD looks black.
● The camera is too hot for
operation.
● Put the camera in a cool place. The LCD should return to
normal once it cools down.
The battery becomes
exhausted quickly.
● The batteries are not the same
type.
● Replace both batteries with new CR2 lithium batteries of
the same brand/type.
Printed pictures
Problems Possible Causes Solutions
Part or whole nished
print is white.
● The back cover is opened
before you have used up the
lm.
● Do not open the back cover until you have used up
the lm; otherwise, the rest of the lm is exposed and
ruined for use.
The nished print looks
over exposed. (White in
color)
1 The ambient temperature is
low (below +5°C/+41°F).
2 The AE light sensor window
or ash sensor window is
blocked.
1 Before taking pictures, place your camera in a warm
place to bring it to room temperature.
2 Be careful not to block the AE light sensor or ash sensor
window, or so that nothing blocks it.
BO-7_6lang.indb 20 2015/7/14 8:47:59