User Guide

41
EN
SPECIFICATIONS
instax SP-2
Recording method 3-color exposure with OLED
Film Fujilm INSTAX mini instant color lm (sold separately)
Photo capacity 10 prints/pack
Image size 62 mm×46 mm
Supported image size 800×600 dots
Printing resolution 320 dpi
Printing levels 256 levels per color (RGB)
Interface Standard compliance: IEEE802.11b/g/n
Operation frequency: 2.4 GHz (5 GHz is not supported.)
Supported image format JPEG, PNG
Printing time Image recording - photo output (fed out): Approx. 10 sec.
Approximate printing
capacity
Approx. 100 prints (Based on our test conditions)
* Varies depending on the conditions of use.
Charging time Approx. 90 minutes (Varies depending on battery remaining level)
Power supply NP-45S (1 piece)
Power consumption 2 W
Operating temperature
+5°C to +40°C/+41°F to +104°F (no condensation)
Dimensions/Weight 89.5 mm × 131.8 mm × 40 mm (excluding projections)
250 g (without battery and lm pack)
Supplied accessory USB cable
(BOB711)
* Specications above are subject to change for improvement.