User Manual

Drive Mode

Bracketing

Automatically vary settings over a series of pictures.

Option

Description

AE BKT

Select a bracketing amount. Each time the shutter button is pressed, the camera will take three

shots: one using the metered value for exposure (P 57), the second overexposed by the selected

amount, and the third underexposed by the same amount (regardless of the amount selected, ex-

posure will not exceed the limits of the exposure metering system).

ISO BKT

Select a bracketing amount. Each time the shutter is released, the camera will take a picture at the

current sensitivity (P 58) and process it to create two additional copies, one with sensitivity raised

and the other with sensitivity lowered by the selected amount (regardless of the amount selected,

sensitivity will not exceed ISO 12800 or fall below ISO 200).

FILM SIMULATION BKT

Each time the shutter is released, the camera takes one shot and processes it to create copies at the

settings chosen using A SHOOTING SETTING> FILM SIMULATION BKT (P 60, 95).

WHITE BALANCE BKT

Select a bracketing amount. Each time the shutter button is pressed, the camera takes three shots:

one at the current white balanced setting (P 61), one with  ne-tuning increased by the selected

amount, and another with  ne-tuning decreased by the selected amount.

DYNAMIC RANGE BKT

Each time the shutter button is pressed, the camera takes three shots with di erent dynamic ranges

(P 89): 100% for the  rst, 200% for the second, and 400% for the third. While dynamic range bracket-

ing is in e ect, sensitivity will be restricted to a minimum of ISO 800 (or to a minimum of ISO 200

to 800 when an auto option is selected for sensitivity); the sensitivity previously in e ect is restored

when bracketing ends.