JP EN 使用説明書/困ったときには/安全にご使用いただくために User’s Guide/Trouble shooting/Safety precautions BOC703-100
ENGLISH Contents Parts Name............................................ 30 Before Use.............................................. 31 Inserting/Charging the Battery...... 31 Inserting the Battery......................................31 Charging the Battery.....................................32 Charging Indicator.........................................32 Loading the instax SQUARE Film Pack..... 33 Turning on/off the Printer................ 34 Unloading a Used instax SQUARE Film Pack....................
Parts Name 3 2 1 7 8 EN 10 4 5 9 6 30 1 Battery remaining LED 5 USB connector cover 2 Film remaining LED 6 USB connector 3 Print exit 7 Back cover lock 4 POWER button 8 REPRINT button 9 10 Battery cover Back cover
Before Use • Before using the printer, install the instax SHARE application on your device. • When you are using an Android OS device, search for “instax SHARE” in the Google Play, then install the application. * System requirements of an Android OS device: Android Ver 4.0.3 or later and Google Play are installed. • When you are using an iOS device, search for “instax SHARE” in the App Store, then install the application. * System requirements of an iOS device: iOS Ver 8.0 or later is installed.
Inserting/Charging the Battery (Continued) Charging the Battery Be careful of the orientation. Connect the USB cable ) on the terminal facing up. with the mark ( Charging Indicator Indication Lights red (ON) Flashes red (OFF) Battery status/Action Charging is in progress. Lights orange (ON) Charging is half completed.
Loading the instax SQUARE Film Pack Caution Do not open the back cover until you have used up the film; otherwise, the rest of the film will become exposed and turn white. The film can no longer be used. • When you load the film pack, never press the two rectangular holes on the back of the film pack. • Never use a film pack beyond its shelf life; otherwise, it may damage the printer. Use FUJIFILM Instant Film “instax SQUARE” only. The instax mini film or instax WIDE film cannot be used.
Loading the instax SQUARE Film Pack (Contunued) Turning on/off the Printer ! EN Close the back cover. Make sure the back cover lock clicks into place. ⁄ Press and hold the POWER button for approx. 1 second to turn the printer on or off. Turning the printer on lights up the battery remaining LED. If no operation occurs for a certain period of time, the printer turns off automatically.
Connecting and Printing Notes on Printing Ÿ 1. Place the printer vertically. 2. When printing, put the printer on a steady surface such as a desk. EN Wireless LAN Setup for iOS Devices When you are using an iOS device, follow the procedure below to perform wireless LAN setup. Start the downloaded application “instax SHARE”. 1. Select “ON” for “Wi-Fi” in the “Settings” menu of your device. 2. Tap the network name (printer name) under “Choose a Network”.
Connecting and Printing (Continued) ⁄ Tap “Connect and print”. Before tapping “Connect on and print”, tapping the lower right displays the edit menu. You can add a template or adjust an image on this menu. Tap “Done” to exit from the menu. EN 1111 When printing, put the printer on a steady surface such as a desk. To reset the password to the factory default (1111), turn the printer on while holding the REPRINT button.
Connecting and Printing When connection is already established: ! ~ EN Press and hold the POWER button for approx. 1 second to turn the printer on. The battery remaining LED lights up. Ÿ Start the downloaded application “instax SHARE”. Select the picture to print or take a picture. ⁄ Tap “Print”. The printer starts printing. • When printing, put the printer on a steady surface such as a desk. • Before tapping “Print”, on the lower tapping right displays the edit menu.
Connecting and Printing (Continued) Reprinting @ ~ Press the REPRINT button once. EN When the film has been ejected (the printer stops making a sound), grasp the edge of the film, then take it out. 1 film remaining LED turns off every time you print an image. Ÿ Every time you press the REPRINT button, the previous image is reprinted. • The last printed image is stored even if you turn the printer off. (You can select whether to store the image on the instax SHARE application.
Deleting an Image Unloading a Used instax SQUARE Film Pack ~ Press and hold the REPRINT button for more than 5 seconds with the printer on. When no film is left, all the film remaining LEDs flash slowly. Unload the film pack. EN ~ Ÿ Press the back cover lock down to open the back cover. The film remaining LED flashes for 1 second and the image is deleted. Ÿ Grasp the rectangular holes on the film pack, then pull it out.
About the LED Indication Film remaining LED indication Battery remaining LED indication The film remaining LED indicates film remaining, printer operation, or error warning. 1 film remaining LED turns off every time you print an image, and flashes slowly to indicate no film remains. See the table below for other indication patterns. The battery remaining LED indicates the printer status while charging the battery, or battery life of the printer. See page 32 for indications while charging the battery.
SPECIFICATIONS instax SP-3 Recording method Film Photo capacity Image size Supported image size Printing resolution Printing levels Interface Supported image format Printing time Approximate printing capacity Power supply Charging time Power consumption Operating temperature Dimensions/Weight Supplied accessory 3-color exposure with OLED FUJIFILM Instant Film “instax SQUARE” (Purchased separately) 10 prints/pack 62 mm×62 mm/2.4 in.×2.4 in. 800×800 dots 12.
TROUBLE SHOOTING During printing Problems The printer cannot be turned on. EN 42 Possible Causes 1 The battery power is low. (The battery remaining LED is flashing red.) 2 The battery is not inserted correctly. 3 You did not press the POWER button for long enough. Solutions 1 Charge the battery fully. 2 Insert the battery correctly. 3 Press and hold the POWER button for approx. 1 second. You entered the ● The password is incorrect. password, but the device cannot be connected to the printer.
Problems Possible Causes Solutions The film pack cannot be loaded, or cannot be loaded smoothly. 1 The film pack is not for your printer. 2 The film pack is not being loaded correctly. 1 Use FUJIFILM Instant Film “instax SQUARE” only. (No other films can be used.) 2 Match the yellow line on the film pack with the yellow positioning mark in your printer. The film cover cannot be ejected. ● The printer cannot recognize the film pack. ● Remove the film pack and load it again.
LED status Problems EN 44 Possible Causes Solutions The film remaining LED flashes rapidly, then the printer turns itself off. ● A printer error has occurred. ● Turn the printer on. The battery remaining LED flashes red slowly, then the printer turns itself off. ● The battery power is low. ● Charge the battery fully. When the remaining battery life is low, you cannot turn the printer on even though the printer is connected to the AC power outlet using the USB cable.
Printed pictures Problems Possible Causes Solutions Part or whole finished print is white. ● The back cover was opened before you have used up the film. ● Do not open the back cover until you have used up the film; otherwise, the rest of the film may be exposed and ruined for use. The picture is blurred. 1 Pressure was applied to the picture immediately after it came out from the printer. 2 The picture did not come out smoothly. 1 Do not shake, bend, fold, or press the print.
IMPORTANT SAFETY NOTICE This product has been designed with safety in mind, and to provide safe service when handled correctly and in accordance with the User’s Guide and instructions. It is important that both the product and the INSTAX film are handled properly and used only to print pictures as instructed in this User’s Guide and in the instax SQUARE film instructions. For your ease and safety, please follow what is written in this User’s Guide.
WARNING Never attempt to take this product apart. You may be injured. If anything is wrong with the printer, never attempt to repair it by yourself. You may be injured. If this product is dropped or damaged so that the inside is showing, do not touch it. Contact your FUJIFILM dealer. Do not touch any parts or projecting parts inside the back cover. You may be injured. Never get this product wet or handle it with wet hands. Doing so may result in an electric shock.
EN installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If your equipment contains easy removable batteries or accumulators, please dispose these separately according to your local requirements. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you have purchased the product.
~ Make sure the printer stands up vertically; otherwise, it may not deliver the designed performance fully. ! This printer is designed for household use. It is not suitable for commercial printing which requires a large amount of printing. Cautions during printing EN INSTAX SQUARE FILM AND PRINT CARE See FUJIFILM Instant Film “instax SQUARE” for film use instructions. Follow all instructions for safe and proper use. 1 Keep the film in a cool and dry place.
Cautions on handling the film and prints For details, refer to the instructions and warnings on FUJIFILM Instant Film “instax SQUARE”. EN Wireless Network Devices: Cautions IMPORTANT: Read the following notices before using the printer’s built-in wireless transmitter. ■ Use only as part of a wireless network. FUJIFILM does not accept liability for damages resulting from unauthorized use.
■■ Do not use the device in locations subject to magnetic fields, static electricity, or radio interference. Do not use the transmitter in the vicinity of microwave ovens or in other locations subject to magnetic fields, static electricity, or radio interference that may prevent reception of wireless signals. Mutual interference may occur when the transmitter is used in the vicinity of other wireless devices operating in the 2.4 GHz band. ■■ The wireless transmitter operates in the 2.
Handling the Battery • Make sure that you use your printer correctly. Read these safety notes and your User’s Guide carefully before use. • After reading these safety notes, store them in a safe place. WARNING CAUTION This symbol indicates danger, which could result in injury or This symbol indicates possible damage, which could result in death. Please follow these instructions. injury to other people or damage to an object. Please follow these instructions. Please handle the product properly.
CAUTION EN Required When you are cleaning the printer or you do not plan to use the printer for an extended period, remove the battery. Failure to do so can cause a fire or electric shock. Required If a problem arises, turn the printer off and remove the battery. Continued use of the printer when it is emitting smoke, is emitting any unusual odor, or is in any other abnormal state can cause a fire or electric shock. Contact your FUJIFILM dealer.
■■ Storage Performance may be impaired if the battery is left unused for extended periods when fully charged. Deplete the battery fully before storing it. If the printer will not be used for an extended period, remove the battery and store it in a dry place with an ambient temperature of from +15 °C to +25 °C (+59 °F to +77 °F). Do not store in locations exposed to extremes of temperature. ■■ Cautions: Handling the Battery • • • • Do not affix stickers or other objects to the battery.