JP EN 使用説明書/困ったときには/安全にご使用いただくために User’s Guide/Trouble shooting/Safety precautions CPL11B704-101
ENGLISH Contents Part Names............................................................................................................................................................26 Attaching the Strap............................................................................................................................................28 Inserting Batteries...............................................................................................................................................
Part Names Front 1 2 EN 1 Power switch 2 Film ejection slot 4 3 Self timer lamp 5 4 Viewfinder 6 5 Strap hook 6 Shutter button 7 AE light sensor window 8 Flash sensor window 9 Tripod socket (Tripod sold separately) 3 12 11 7 8 9 26 10 10 Lens/Lens cover 11 Self-portrait mirror 12 Flash lampface
Part Names (Continued) Rear 13 14 15 13 Mode indicator/LED 23 14 Strap hook 22 15 MODE (mode) button 16 Self timer button 17 Flash suppressing button 18 Back cover lock 19 Back cover 20 Film counter 21 16 17 18 19 20 21 Battery lid 22 Film pack confirmation window 23 Eyepiece EN 27
Attaching the Strap Attach the provided camera strap to the strap hook on each side as in the illustrations below. ~ EN Ÿ Caution • For safety, use the strap only as a shoulder strap. Do not put the strap around your neck. • Be careful so that the strap does not obstruct the film ejection slot.
Inserting Batteries Caution • Use two new CR2 lithium batteries. (All the batteries should be new and be the same brand/type.) • Insert the batteries before you load the instax SQUARE film pack. • The battery performance may be reduced when it is cold. In this case, warm up the batteries to room temperature before using this camera. ~ ! EN Open the battery lid. Ÿ Insert the batteries. • Insert one CR2 lithium battery straight (1) matching the C and D polarities and slide it to the end (2).
Loading the instax SQUARE Film Pack Caution Do not open the back cover until you have used up the film; otherwise, the rest of the film will become exposed and turn white. The film can no longer be used. • When you load the film pack, never press the two rectangular holes on the back of the film pack. • Never use a film pack beyond its shelf life; otherwise, it may damage the camera. EN Use FUJIFILM Instant Film “instax SQUARE” only. The instax mini film or instax WIDE film cannot be used.
Loading the instax SQUARE Film Pack (Continued) @ ! EN Close the back cover. Make sure the back cover lock clicks into place. ⁄ Press the shutter button. The film cover (black) is ejected and “10” is displayed on the film counter on the back of the camera. Carefully remove the film cover. Slide the power switch toward the “ON” side to turn the camera on. • Do not hold the lens cover when you are turning the camera on; otherwise, the lens cover will not open.
Turning the Camera on/off Taking Pictures ~ Slide the power switch toward the “ON” side to turn the camera on. Ÿ Hold the camera and confirm the desired composition of the final image. ! EN Slide the power switch toward the “ON” side to turn the camera on. The lens will extend and the LED on “ ” will light up. • Do not hold the lens cover when you are turning the camera on; otherwise, the lens cover will not open. Slide the power switch toward the “OFF” side to turn the camera off.
Taking Pictures (Continued) ⁄ Every time you take a photo, the number on the film counter decreases from “10” to reflect the number of remaining photos, and “0” is displayed when you have used up the film pack. When the film has been ejected (the camera stops making a sound), grasp the edge of the film, then take it out. • The developing time is approximately 90 seconds. (The time varies depending on the ambient temperature.
Taking Pictures with Various Shooting Modes You can choose settings according to the subject or purpose. Selecting a Shooting Mode Press the MODE (mode) button. The LED on the selected mode lights up. EN Each time you press the MODE button, the shooting mode changes as follows. Auto Selfie Darken Lighten Macro Landscape Double exposure • Taking a photo does not change the settings. • Turning the power off returns to Auto.
Taking Pictures with Various Shooting Modes (Continued) Shooting Mode • In a dark place, the slow shutter may automatically be used. Hold the camera securely to prevent camera shake. • The background may look bluish-green or reddish depending on the lighting condition. Auto Select for normal photography. • As the flash fires with slow shutter (slow synchro) in a dark place, the background is photographed brightly. EN Selfie You can take a self portrait using the self portrait mirror.
Taking Pictures with Various Shooting Modes (Continued) Shooting Mode (Continued) Macro Double exposure 2 subjects are photographed in one picture. When you shoot the first subject, the LED on After that, shoot the second. EN Lighten Select when shooting a subject at close range (30-50 cm). • Hold the camera so that the “O” mark in the viewfinder is on the upper right of the center of the subject (see the illustration above), then take a photo. Landscape Select when shooting a distant subject (2 m~∞).
Using the Self Timer You can use the self timer in combination with each shooting mode. ~ Ÿ Lit about 7 seconds Flashes about 3 seconds EN Press the self timer button once. The LED on the self timer button lights up. If you press the shutter button, the self timer lamp is lit about 7 seconds. After that, the lamp flashes about 3 seconds and the shutter is released. ※ To cancel the self timer, press the self timer button while the self timer lamp is lit or flashing.
SPECIFICATIONS Film Picture Size Lens Viewfinder Focusing EN Shutter Release Exposure Control Film Feeding Out Film Developing Time Flash Self-Timer LED Display Power Supply Others Dimensions & Weight Accessories FUJIFILM Instant Film “instax SQUARE” (Purchased separately) 62 mm x 62 mm/2.4 in.×2.4 in. Retractable lens, 2 components, 2 elements, f = 65.75 mm, 1:12.6 Inverted Galilean finder, 0.4 x, with target spot Motor-driven 3-range switching (0.3 m - 0.5 m/1 ft. - 1.6 ft., 0.5 m - 2 m/1.6 ft - 6.
TROUBLE SHOOTING ★When to replace the batteries 1 When the lens does not work when the power is switched on. 2 When it takes an unusually long amount of time for the flash to be charged. 3 When pressing the shutter button turns off the camera. * Replace both CR2 batteries with new lithium batteries of the same brand/type. TROUBLE SHOOTING During operation Problems Possible Causes Solutions The shutter release won’t trip. 1 Replace both batteries with new batteries. 1 The battery power is low.
Problems Possible Causes Solutions The film cannot be ejected. 1 The camera shakes or has been dropped and the film is misaligned. 2 The film has been jammed. 1 Load a new film pack. 2 Remove both batteries and insert them again. If this does not solve the problem, remove the jammed film and load a new film pack. The battery becomes exhausted quickly. ● The batteries are not the same type. ● Replace both batteries with new CR2 lithium batteries of the same brand/type.
Problems Possible Causes Solutions The picture is out of focus. 1 The shooting distance is not appropriate. 2 The lens is not clean. 3 Your camera was shaken when taking the picture. 1 Select the shooting mode according to the distance. 2 Clean the lens. 3 Hold your camera firmly and press in the shutter release button gently. Since the slow shutter is selected when shooting indoors or dark outdoors, stabilizing the camera using a table, tripod, etc. is recommended. The picture is blurred.
IMPORTANT SAFETY NOTICE This product has been designed with safety in mind, and to provide safe service when handled correctly and in accordance with the User’s Guide and instructions. It is important that both the product and the INSTAX film are handled properly and used only to take pictures as instructed in this User’s Guide and in the instax SQUARE film instructions. For your ease and safety, please follow what is written in this User’s Guide.
WARNING Only use specified batteries in this product. Use of incorrect type of batteries could cause explosion. Dispose of used batteries according to battery disposal instructions. Make sure batteries are stored in a safe, secure place and well out of the reach of any infants, young children or pets. Improper storage could result in a child swallowing a battery. (If a child swallows a battery, call a doctor or a hospital right away.) Never get this product wet or handle it with wet hands.
Changes or modifications not expressly approved by FUJIFILM responsible for compliance could void the user’s authority to operate the equipment. For customers in Canada : CAUTION: This Class B digital apparatus complies with Canadian ICES-003.
5 Remove soil and dust from the lens, viewfinder window, etc. with an air blower and by wiping lightly with a piece of soft cloth. 6 Do not use solvent such as thinner and alcohol to remove soil. 7 Keep the film chamber and camera interior clean to avoid damaging films. 8 In hot weather, do not leave your camera in a closed car or on the beach, and do not leave it in moist places. 9 Moth repellent gas such as naphthalene adversely affects your camera and films.
Information for traceability in Europe Information for FUJIFILM in the United States Manufacturer: FUJIFILM Corporation Address, City: 7-3, Akasaka 9-Chome, Minato-ku, Tokyo Country: JAPAN FUJIFILM North America Corp. 200 Summit Lake Drive Valhalla, New York 10595, USA Authorized representative in Europe: FUJIFILM EUROPE GMBH Address, City: Dusseldorf Heesenstrasse 31, 40549 Country: Germany EN 46 Information for FUJIFILM in Canada FUJIFILM Canada Inc.