NA_EN User's Guide (Full version) instax mini Link1
Table of Contents Before Use ����������������������������������������������������������������������������������� 3 Notes on Disposing of the Printer ������������������������������������������ 3 Part Names ���������������������������������������������������������������������������������� 3 Installing the App ���������������������������������������������������������������������� 4 Charging the Battery ���������������������������������������������������������������� 4 Battery Status Indication with the LED Lig
NA_EN Before Use Part Names Before using the printer, check to make sure you have the following. Supplied Accessories • USB cable for charging (1) • User's Guide (1) hen you use the printer for the first time, be sure to fully W charge the battery. Front 1 (BOD700) 5 Notes on Disposing of the Printer 4 A built-in lithium ion battery is used for this printer. When you dispose of the printer, follow your local regulations and dispose of it properly.
Installing the App Please install the INSTAX Mini Link Smartphone App on your smartphone before using the printer. • If you are using an Android OS smartphone, please search for the INSTAX Mini Link Smartphone App in Google Play Store and install it. *Requirements for Android OS smartphones: Android Ver. 5.0 or higher with Google Play Store installed • If you are using an iOS smartphone, please search for the INSTAX Mini Link Smartphone App in the App Store and install it.
NA_EN Notes • The battery cannot be removed. • The battery is not fully charged when shipped. Be sure to charge the battery before use. • For notes about the battery, see “Common Sense Printer Care”. (p.13) Loading/Unloading the INSTAX Mini Film Pack Caution Do not open the film door until you have used up the film; otherwise, the rest of the film will become exposed and turn white. The film can no longer be used.
3 Close the film door. 4 Remove the black film cover that is automatically rejected. Turning on/off the Printer Press and hold the Power button for approximately 1 second to turn the printer on or off. Turning the printer on lights up the LED. If no operation occurs for roughly 10 minutes, the printer turns off automatically. Checking the Printer Status with the LED Light on Printer Unloading a Used Film Pack 1 Slide the film door lock and open the film door.
NA_EN Connecting and Printing 4 Set the [Bluetooth Connection] to [Later]. [Bluetooth Connection] can also be set in the process of printing. When Establishing Connection for the First Time 1 Quick instructions are displayed. Read the instructions and tap [I Understood →]. Press and hold the Power button for approximately 1 second to turn the printer on. The LED lights up. 2 Start the downloaded INSTAX Mini Link App.
6 Tap or swipe the image up on the screen. 8 When a printer is connected, tap [Close]. 9 Tap Before tapping , tapping on the lower right adjusts the image and tapping on the lower left applies a filter to the image. 10 Note If your Bluetooth settings are switched off, the following screen appears. Tapping [Please turn on Bluetooth] opens the Bluetooth settings screen. Put the Bluetooth settings on. 7 8 When a printer is detected, tap [Connect].
NA_EN When the Printer and Your Smartphone Are Already Connected 1 4 Tap 5 When the film has been ejected (the printer stops making a sound), hold the edge of the film, then take it out. Press and hold the Power button for approximately 1 second to turn the printer on. or swipe the image up on the screen. The printer starts printing. Before tapping , tapping on the lower right adjusts the image and tapping on the lower left applies a filter to the image. The LED lights up.
Reprinting an Image You can reprint the image you last printed by using the Reprint motion sensor function. Turn the printer over with the film ejection slot facing down and press the Power button. Controlling the App with the Angle of the Printer and the Power Button When this printer is linked with the App on your smartphone or tablet, you can control the App by tilting the printer. (Smartphone App linked function) For details, refer to the FAQ of the INSTAX Mini Link Smartphone App.
NA_EN Controlling Zoom and Shutter When Using the INSTAX Camera on the App Tilt the printer forward to zoom in. Tilt the printer backward to zoom out. Specifications Recording method 3-color exposure with OLED Film used FUJIFILM INSTAX Mini Instant Film (sold separately) Number of films 10 films/pack Image size 62 mm × 46 mm/2.4 in. × 1.8 in. Supported image size 800 × 600 dots Printing resolution 12.
Troubleshooting Please check the following items before considering a problem to be a malfunction. If the problem persists even after taking action, please contact the FUJIFILM service center for repair in your country or visit the website below. FUJIFILM website: http://www.fujifilm.com/ If the following problem occurs... Problem Possible causes and solutions I cannot turn on the printer. • The battery may not be charged. Please charge the printer. • You did not press the Power button for long enough.
NA_EN IMPORTANT SAFETY NOTICE This product has been designed with safety in mind, and to provide safe service when handled correctly and in accordance with the User’s Guide and instructions. It is important that both the product and the INSTAX Mini Instant Print Film pack are handled properly and used only to print photos as instructed in the User’s Guide and in the INSTAX Mini film pack instructions. For your ease and safety, strictly follow the instructions in the User’s Guide.
1. Keep the film in a cool place. Do not leave the film in a place where the temperature is extremely high (e.g., in a closed car) for many hours. 2. Do not puncture, tear, or cut INSTAX Mini Instant Print film. If film becomes damaged, do not use. 3. When you load a film pack, use the film as soon as possible. 4. If the film has been kept in a place where the temperature is extremely high or low, bring it to room temperature before loading or starting to print photos. 5.
NA_EN will not occur in a particular installation. If this equipment does cause harmful interference to radio or television, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
