User's Manual

11
NA_EN
Specifications
Recording method 3-color exposure with OLED
Film used FUJIFILM INSTAX Mini Instant Film (sold
separately)
Number of films 10 films/pack
Image size 62 mm × 46 mm/2.4 in. × 1.8 in.
Supported image
size
800 × 600 dots
Printing resolution 12.5 dots/mm (318 dpi, 80 μm dot pitch)
Printing levels 256 levels per color (RGB)
Interface Standard compliance: Bluetooth Ver. 4.2
(BLE)
Supported image
format
JPEG, PNG, HEIF
Printing time Image recording - photo output (fed out):
Approximately 12 sec.
Approximate
printing capacity
Approximately 100 prints (from full
charge)
* The number of prints depends on the
usage conditions.
Power supply Lithium ion battery (internal type: not
removable)
Charging time Approximately 80 to 120 minutes
(Charging time depends on the
temperature and battery remaining level)
Power consumption Approximately 3 W
Operating
environment
Temperature: +5 ºC to +40 ºC (+41 ºF to
+104 ºF)
Humidity: 20% to 80% (no condensation)
Main unit
dimensions
90.3 mm × 34.6 mm × 124.5 mm/3.5 in. ×
1.3 in. × 4.9 in.(excluding projecting
parts)
Main unit mass Approximately 209 g/7.3 oz (excluding
film pack)
Supplied accessory USB cable (BOD700, Length: 30 cm/11.8
in.)
*The above specifications are subject to change.
Controlling Zoom and Shutter When Using the
INSTAX Camera on the App
Tilt the printer forward to zoom in.
Tilt the printer backward to zoom out.
Press the Power button to release the shutter.