BL00005025-100 FUJINON LENS GF50mmF3.
For Your Safety Be sure to read these notes before use Safety Notes Thank you for your purchase of this product. For repair, inspection, and internal testing, contact your Fujifilm dealer. • Make sure that you use the lens correctly. Read these safety notes and the camera Owner’s Manual carefully before use. • After reading these safety notes, store them in a safe place.
WARNING Do not place on unstable surfaces. The product may fall, causing injury. Do not view the sun through the lens or camera viewfinders. Failure to observe this precaution can cause permanent visual impairment. CAUTION Do not use or store in locations that are exposed to steam, or smoke or are very humid or extremely dusty. Failure to observe this precaution can cause fire or electric shock.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. • You are cautioned that any changes or modifications not expressly approved in this manual could void the user’s authority to operate the equipment. Notes on the Grant: To comply with Part 15 of the FCC Rules, this product must be used with a Fujifilm-specified ferrite-core A/V cable, USB cable, and DC supply cord.
• Use a blower to remove dust and lint from the Before Using This Product The lens may not perform as expected and some features may not be available with older versions of the camera firmware. Be sure to update the camera firmware to the latest version. Instructions on viewing the camera firmware version and updating camera firmware are available from the following website: http://www.fujifilm.
Parts of the Lens GF50mmF3.5 R LM WR A Hood cap B Lens hood C Focus ring D Aperture ring lock release E Mounting marks (focal length) F Aperture ring G Lens signal contacts H Front lens cap I Rear lens cap Q The lens mount includes a rubber ring to ensure that the lens remains dust- and splash-proof. The ring can be replaced for a fee at any Fujifilm service center.
Supplied Accessories Removing the Caps • • • • • Remove the caps as shown. Front lens cap Rear lens cap Lens hood Hood cap Lens wrapping cloth Attaching the Lens See the camera manual for information on attaching and removing lenses. Q This lens is for use exclusively with FUJIFILM G mounts and can not be used with X mounts.
Attaching the Hood When attached, lens hoods reduce glare and protect the front lens element. Use the hood cap in place of the front lens cap to cap the lens with the hood in place. Warning If you attach the hood too tightly after attaching a filter to the lens, the filter may remain stuck to the hood when the hood is removed. Do not attempt to forcibly separate the hood and filter, as the filter threads could injure your hands.
Aperture ring Rotate the lens aperture ring to choose the aperture (f-number). ): Set aperture to the value chosen with the AC( camera command dial. BA( ): Set aperture to the value chosen automatically by the camera. C Other values ( ): Set aperture to the selected value. C A 32 22 16 11 R To select C or A, or to select another value after selecting C or A, press the aperture ring lock release while rotating the aperture ring.
Specifications Type Lens construction Focal length (35 mm format equivalent) Angle of view Max. aperture Min. aperture Aperture control Number of blades Stop size Focus range (measured from focal plane) Max. magnification External dimensions: Diameter × Length* (approx.) * distance from front of lens to lens mount flange Weight* (approx.) * excluding caps and hoods Filter size GF50mmF3.5 R LM WR 9 elements in 6 groups (includes 1 aspherical element) f=50 mm (40 mm) 57.4° f/3.
