User Manual

15
1
Getting Started
Attachment and Removal
Turn the  ash o before mounting it on or removing it
from the hot shoe. If the  ash is on, it may short the
hot shoe contacts, causing the  ash to  re unexpect-
edly or other product malfunction. Remove any wa-
ter from the mount and the hot shoe before attach-
ing the  ash.
Attaching the Flash
1
Release the latch by sliding it as
shown.
O
Be sure to release the latch before at-
taching the  ash. Failure to observe
this precaution could damage the hot
shoe.
2
Slide the mount all the way into
the camera hot shoe.
3
Latch the unit in place by sliding
the latch in the direction shown.